EDAC 400-24

24 Volt 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

Download the Manual

Features

  • Cost-effective auto-reporting dialler
  • Compact design, easy installation
  • Activated by contact closure or opening
  • Transmits 8-second voice message or 20-character pager/SMS
  • Alarm notification call to a list of phone numbers or pagers
  • Interrogated via telephone keypad
  • User-programmable phone numbers, messages, and functions
  • Flexible telemetry monitoring tool

Specifications

  • Inputs: 4 clean-contact, voltage-free triggers
  • Outputs: Up to 4 open collector type (maximum current 120mA per output)
  • Power: 10-30V DC, 40mA idle, 80-100mA active
  • Telecom Line: 2 RJ11 sockets
  • RS232 Connector: Used for programming or providing 2400 baud modem connection to external device
  • Mechanical: 192mm x 110mm x 35mm, 250g, aluminum cabinet, white epoxy powder coat finish
  • Messages: 4 seconds of high-quality user-recordable speech per input or status
  • Parameters: 4 phone numbers per input, up to 20 digits per number, variable call playtime and wait time
  • Dialling mode: DTMF (tone dialling)
  • Numeric Paging: 20-digit numeric string transmission to pagers

For more detailed information, download the full manual.

Read a Case Study

EDAC 222-02

2 input, 2 output auto alarm dialler, 16 numbers, voice and numeric paging.

EDAC 400-02

12 Volt auto alarm dialler, 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

EDAC 400-24

24 Volt 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

EDAC 700-RTU

20 input and output auto alarm dialler programmable as either input or output (digital or analogue). Roster, time frame and call list functionality. Alpha-numeric paging capable.

EDAC 720-DE

32 bit digital input, pulse counting and runtime meter expansion unit for the EDAC 700-RTU.

OffTrac Remote Monitoring & Reporting System

Cost effective and low maintenance, this monitoring device sends SMS text alerts and emails to key personnel, whenever it falls outside of its pre-programmed parameters. www.offtrac.co.nz

EDAC 315-4G

8 Input, 4 output SMS Controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable. Up to 16 users. Data logging to SD card. 

EDAC 320-4G & 321-4G

8 input, 4 output SMS controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable, up to 16 users. Alarm messages forwarded to email & cell phones. Data logging to SD card. Pulse counting options. 

PB12

13.8VDC 2.8A power supply with battery backup. Includes 1.2Ah battery. Suitable for use with the 222-02 and 400-02 diallers.

PB20


The PB20 is designed to be used with EDAC products. The unit produces a continuous output of 13.8V DC at loads up to 4A. During mains fail the internal battery can maintain operation for periods from one hour upwards depending on load. The 13.8V output is electrically regulated, providing a constant voltage over the 0 to 4A output current range and providing standby charging of the battery.

Fixed Wireless Terminal

Used with EDAC units when no phone line is available. It uses SIM card to connect to network and dial out alarms.