EDAC 315-4G
8 Input, 4 output SMS Controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable. Up to 16 users. Data logging to SD card.
Features
- Cost-effective cellular based remote monitoring control and logging system
- Connects to approved GSM (2G) and UMTS (3G) cellular networks
- Uses Short Messaging Service (SMS) technology to report status and deliver alarm information
- Ability to monitor up to 8 inputs with digital, 4-20mA analogue, or 0-5V analogue options
- Has 4 integrated relay outputs with programmable contact slots
- Records information to onboard flash memory card
- Sturdily constructed with extruded aluminum case
- Power Supply: 12-28V AC/DC
- Approved Networks: Telstra, Vodafone, 2degrees, Telecom XT
- Contact List capacity: 16 cell phone numbers
- Input Types: 8 user selectable 10bit analogue or digital inputs
- Control outputs can be controlled manually or linked to alarm conditions
Specifications
- Mechanical: Aluminium Enclosure (190mm (w) x 145mm (d) x 45mm (h))
- Power Supply: 12-28V AC/DC supply with <100mA idle mode
- Network Connection: GSM/GPRS/EDGE 850 MHz, 900 MHz, 1800MHz, 1900 MHz and UMTS – WCDMA/HSPA 800 MHz, 850 MHz, 900 MHz, 1900MHz, 2100 MHz
- Alarm Delivery Method: SMS
- Input Types: 8 user selectable 10bit analogue or digital inputs with sensor out of range warnings
- Analogue Input: Configurable 0-5V or 4-20mA with scaling and zero offset parameters
- Logging Options: Digital and analogue with system time/date stamp
- Control Outputs: Normally open relays, 2A max
[download the full manual] Download the full manual for complete details on the EDAC 315-NG.
PB20
The PB20 is designed to be used with EDAC products. The unit produces a continuous output of 13.8V DC at loads up to 4A. During mains fail the internal battery can maintain operation for periods from one hour upwards depending on load. The 13.8V output is electrically regulated, providing a constant voltage over the 0 to 4A output current range and providing standby charging of the battery.