EDAC 320-4G & 321-4G

8 input, 4 output SMS controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable, up to 16 users. Alarm messages forwarded to email & cell phones. Data logging to SD card. Pulse counting options. 

Download the Manual

Features

  • Cellular-based remote monitoring and control system
  • connects to 3G and 4G cellular networks
  • Monitors up to 8 inputs (320) and 5 inputs (321)
  • Sends messages via SMS or email
  • 4 integrated relay outputs for equipment control
  • Input information can be recorded and viewed locally or remotely
  • Constructed in an extruded aluminium case for ruggedness and reliability

Specifications

Power Supply 12-28V AC/DC supply

When in idle mode the EDAC 320 draws less than 100mA. The PSU must be able to

supply a peak current of up to 1A at 12VDC and 500mA at 24VDC

Fuse 1A Internal Fixed Re-settable Fuse.

Telephone Network Connection GSM/GPRS/EDGE 850 MHz, 900 MHz, 1800MHz, 1900 MHz

UMTS – WCDMA/HSPA 800 MHz, 850 MHz, 900 MHz, 1900MHz, 2100 MHz

Approved Networks: Telstra (Australia), Vodafone (New Zealand), 2degrees (New

Zealand), Telecom XT (New Zealand)

* SMS and PSD functionality. CSD not available on all networks

Contact List capacity 16 entries consisting of either cell phone numbers (for SMS alarm messages), or email

addresses (for email messages). Each alarm can be sent to any combination of these

contacts. SMS messages can be delivered to any cellular network in the world that is

interlinked with the host network

Alarm Delivery Method SMS and/or email (email requires PSD)

Input Types 320: 8 user selectable 10bit Analogue or Digital inputs. Sensor out of range

warnings. Optional DC power supply monitoring (requires user calibration

321: 5 user selectable 10bit Analogue or Digital inputs,

dedicated power supply monitoring input (requires user calibration),

2 frequency counting pulse input available on EDAC 321-xx models


Read a Case Study

EDAC 222-02

2 input, 2 output auto alarm dialler, 16 numbers, voice and numeric paging.

EDAC 400-02

12 Volt auto alarm dialler, 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

EDAC 400-24

24 Volt 4 configurable inputs & outputs (inputs digital only), 16 numbers, voice, numeric & alpha-numeric paging.

EDAC 700-RTU

20 input and output auto alarm dialler programmable as either input or output (digital or analogue). Roster, time frame and call list functionality. Alpha-numeric paging capable.

EDAC 720-DE

32 bit digital input, pulse counting and runtime meter expansion unit for the EDAC 700-RTU.

OffTrac Remote Monitoring & Reporting System

Cost effective and low maintenance, this monitoring device sends SMS text alerts and emails to key personnel, whenever it falls outside of its pre-programmed parameters. www.offtrac.co.nz

EDAC 315-4G

8 Input, 4 output SMS Controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable. Up to 16 users. Data logging to SD card. 

EDAC 320-4G & 321-4G

8 input, 4 output SMS controller. Inputs configurable to digital, 4-20mA or 0-5V. RS232 programmable, up to 16 users. Alarm messages forwarded to email & cell phones. Data logging to SD card. Pulse counting options. 

PB12

13.8VDC 2.8A power supply with battery backup. Includes 1.2Ah battery. Suitable for use with the 222-02 and 400-02 diallers.

PB20


The PB20 is designed to be used with EDAC products. The unit produces a continuous output of 13.8V DC at loads up to 4A. During mains fail the internal battery can maintain operation for periods from one hour upwards depending on load. The 13.8V output is electrically regulated, providing a constant voltage over the 0 to 4A output current range and providing standby charging of the battery.

Fixed Wireless Terminal

Used with EDAC units when no phone line is available. It uses SIM card to connect to network and dial out alarms.
Share by: